reSee.it - Related Video Feed

The speaker's company is building infrastructure for both technology and renewable energy industries, playing a central role in a complex landscape. Technology customers demand immediate and clean power, while utilities consider affordability for ratepayers and state regulations. The company facilitates discussions between these stakeholders, aiming to deliver projects on time and within budget for all clients. The company builds about 25% of renewable power generation in North America. This unique position allows them to listen to all parties and contribute to solutions in an exciting time for the business.

Speaker 0: All of the world's timber frames that are at least 500 years old are on stone foundations because stone is superior to concrete because it doesn't wick moisture. So your wood can sit directly on the stone without rotting as quickly.

Underneath the spinning vortices are Nexrad radars that use circular polarization to induce rotation. When pointed at a distance, the radars create a wind that can be felt. Connecting it to the ground may enhance its effectiveness. The wind is caused by charges running away from the radar, ionizing the air to the same charge as the radar's tip. The charges try to get away from each other due to their similar charges, resulting in the creation of wind.

To power 100,000 homes for one hour, 50,000 tons of solar panels, or 3,000 AFL fields worth, are needed, assuming the sun is shining. To produce the same electricity in the evening, 50 Tesla batteries, or two basketball courts worth, are required. Charging these batteries necessitates additional solar capacity, adding 600 AFL fields of solar panels. This setup provides one hour of power before the batteries are fully discharged. For two hours of power, another 600 AFL fields of solar panels and two more basketball courts of Tesla batteries are needed, with requirements increasing linearly for longer durations.

The center 13 engines are ignited. The motor slows down to three engines. The super heavy booster glides down into the chopstick arms.

To build a wind turbine, a circular concrete base is formed with intersecting pipes and reinforcement bars. Composite resin is injected into drilled holes, and steel rods are inserted to anchor the tower. Cables for electricity transmission are laid, connecting to a substation. The turbine is assembled on-site with cranes, starting with the tower, nacelle, hub, and blades. Special lifting tools are used for the massive blades, ensuring stability during installation. Once all components are in place, the wind turbine is complete. Spanish Translation: Para construir un aerogenerador, se forma una base circular de concreto con tuberías e barras de refuerzo. Se inyecta resina compuesta en agujeros perforados, y se insertan varillas de acero para anclar la torre. Se colocan cables para la transmisión de electricidad, conectándose a una subestación. El aerogenerador se ensambla en el lugar con grúas, comenzando con la torre, la góndola, el cubo y las aspas. Se utilizan herramientas especiales de elevación para las enormes aspas, asegurando estabilidad durante la instalación. Una vez que todos los componentes están en su lugar, el aerogenerador está completo.

Tomorrow, a wheel will be transported 100 meters underground to the ATLAS experiment at CERN. Hundreds of people have worked on this wheel for several years. It is considered a magnificent piece of engineering and science. It is now ready to be taken and do its job.

To make electro culture antennas, separate the copper wires from the cable and wrap them around a wooden stake. Leave excess wire to build the antenna. Once wrapped, place the stake with the wire into the ground in your garden, forming a spiral shape. This can be done in each corner of the garden.

We need 1,500 cubic meters of concrete for the foundation in Ulm, which is equivalent to 20,000 bags of cement, weighing 525,000 kilograms. This results in a CO2 footprint of 315,000 kilograms, 60% of the total. For the Altdorfer Wald project, with 39 wheels, we require 819,000 bags of cement, weighing a total of 819,000 kilograms. This amounts to a CO2 footprint of 12,285,000 kilograms. It's important to note that these calculations are only for the foundation, not including the tower.

Alright, let's get started. What do we need? Right up to the lift, here. Okay, lift it open. Now, pull both out. Is it on? Yes, it’s on. Pull this one back too, or are you good? You're good for now. Wait for it to pull all the way up. The machinery works well. Should I pull it back again? Yes, pull it out. Looks good. The machinery is impressive; we didn’t even have to use the bat. Sometimes you might need to, though. Overall, the machine works really well. Let’s get some more.

I'm here to show you these old turbine blades that have been dumped. Despite being called renewable energy, there's nothing renewable about them. These blades are quite short, around 20 meters, and they're worn out with not much life left. Recycling them is a challenge, and they sit here like massive beach whales. Compared to the ones in action, they're not that big. So when they run out, they'll just be sitting here, telling a story. The Chilumbin wind farm cost $1.4 billion, but in 15 years, these blades will still be here, not being used.

I'm here to show you these old turbine blades that have been dumped. Despite being called renewable energy, there's nothing renewable about them. These blades are quite short, around 20 meters, and they're worn out with little life left. Recycling them is a challenge. Compared to the massive ones we've seen in action, these blades are not that big. When they run out, they'll just sit here like beached whales. This highlights the story of the Chilumbin wind farm, which cost $1.4 billion but will end up abandoned in 15 years.

Offshore oil rigs extract oil/gas from beneath the seabed, using fixed platforms (up to 1,700 ft), compliant towers (1,500-4,900 ft), or floating rigs (up to 12,000 ft). Semi-submersible platforms float on pontoons, submerged for stability, and are secured with anchors. Key components include a hoisting system, cranes, living quarters, helicopter pad, lifeboats, liquid tanks, and a flare stack for burning off flammable gas. Drilling involves lowering a drill bit inside a casing, pumping water to remove debris, and installing progressively smaller casings with cement. A blowout preventer (BOP) is crucial for preventing accidents from high-pressure oil, or "kicks," which can cause blowouts. BOPs have annulars and pipe rams to seal the well, including a blind shear ram that can cut off the drill string. BOPs require careful testing to prevent disasters. Extracted oil is pumped through subsea pipelines to onshore facilities.

We never intended to build our own data center, but data center providers quoted 18-24 months to get 100,000 GPUs running coherently. That was too long. So, we found an abandoned Electrolux factory in Memphis to house the computers. The factory only had 15 megawatts of power, but we needed 120 to start and eventually a quarter gigawatt for 200,000 GPUs. We leased generators and cooling units to supplement the power until we could get utility power. Getting the liquid-cooled GPUs installed was tough since no one had done liquid cooling at that scale. The power fluctuations of the GPU cluster were massive, causing generator issues. We worked with Tesla to reprogram megapacks to smooth out the power. Then, we had to solve networking issues, like BIOS mismatches, often debugging until 4:20 AM. To make it all happen, we broke down the problem into elements and solved them individually.

In deep water, different types of oil platforms are used based on the depth. Floating rigs are used for deepwater up to 12,000 feet. The rigs are equipped with pontoons for buoyancy and stability. The rigs have hoisting systems, cranes, living quarters, and emergency lifeboats. The main purpose is drilling for oil, with a casing and blowout preventer to manage pressure. Once oil is extracted, it is pumped through subsea pipelines to onshore facilities. Testing of blowout preventers is crucial to prevent accidents and oil spills. Subsea pipelines create a network for oil transportation.

A wind turbine caught fire and collapsed due to lightning and wind damage. Despite the need for energy, none of the turbines in the wind farm were turning. The burning turbine was damaged by a tornado, with smoke containing chemicals and fiberglass. Old turbine blades were found dumped, questioning the true renewable nature of wind energy projects.

We use container-sized reactors to absorb CO2 from the air. These reactors are built in a factory, shipped to the site, and arranged together. When air passes over the material in the reactors, it absorbs CO2. After about 30 minutes, we heat up the reactor to release the CO2, which is the end product. We have hundreds or thousands of reactors working simultaneously, with some always capturing and others delivering the CO2. To implement a capture project, we need access to land with suitable geology and renewable energy sources, as the process is energy-intensive. The end result is not a physical product, but a carbon removal credit, which is a financial instrument that we sell.

I'm here to show you these old turbine blades that have been dumped. Despite being called renewable energy, there's nothing renewable about them. These blades are quite short, around 20 meters, and they're worn out with little life left. Recycling them is a challenge, so they end up sitting here like beached whales. This is the fate of the turbines from the chilumbin wind farm, which cost $1.4 billion. In 15 years, they'll still be sitting here, telling a story of wasted resources.

The booster is attempting a tower catch, which would be the second successful one. The booster is landing and ready, with 13 engines. It is now hovering as it aligns with the tower. It is coming in and down to three engines. Bechzilla has it.

Using electromagnets and a wire coil, a mechanism can be created to lift heavy rocks over long distances. By attaching the wire coil to a power supply and turning it on, the rock can be lifted incrementally. This method could potentially lift a 30-ton rock by one foot at a time. This technique is similar to how Ed Leedskownan may have lifted heavy rocks using his PMH setup.

We are currently dismantling the timber in the second and third sections of the road. This is part of the construction process for the P61 Plus highway. Next, we will be building temporary structures and installing concrete pillars for the bridge. Once that is complete, we will move on to constructing the solid part of the bridge. Finally, we will apply a concrete coating to finish the project.

To make a wind turbine, you need a large amount of iron ore, concrete, and steel. The concrete production emits carbon dioxide, and the steel requires rare earth elements, which are often sourced from China and come with environmental concerns. Additionally, the cobalt used in wind turbines is often mined by child slaves in dangerous conditions in the Congo. The turbine blades are made from balsa wood obtained by clearing parts of the Amazon forest, and they contain a toxic chemical called Bisphenol A. These blades cannot be recycled and end up as landfill, polluting the soil and water. Supporting wind and solar power means supporting pollution, slavery, and environmental damage.

Pine Gap is described as a US-run spy base located in Australia, potentially sitting atop “old world technology,” with this being just the beginning of a broader pattern. In Yorkshire, United Kingdom, the Royal Air Force Menwith Hill is claimed to be the largest electronic monitoring station in the world, operated under the Five Eyes alliance. The speaker asserts the Five Eyes is a US infiltration of Canada, New Zealand, the UK, and Australia, and characterizes it as a one-sided agreement that dictates terms to the other countries. Menwith Hill is said to be constructed between 1956 and 1959 as a 605-acre site with 37 giant radar domes, on British soil but run by the NSA, with an on-site commanding officer American and staffing primarily by US personnel and contractors. The Five Eyes is presented as a means for the USA to infiltrate these countries, and the speaker suggests broadening inquiry to other agreements like Nine Eyes, Fourteen Eyes, NATO, Echelon, and SOFA agreements, which allegedly define the legal status of foreign military forces stationed abroad. The narrative links joint CIA intelligence centers, fusion centers, and biometric data exchanges to extending access to millions of foreign citizens’ DNA, fingerprints, and facial recognition to a single country. The speaker emphasizes that understanding these alliances reveals key players and patterns, comparing it to decoding a game. The episodes are described as sequential for a reason, revealing a progression. UK officials’ attempts to access Menwith Hill are said to have been denied, and Edward Snowden is cited as confirming Menwith Hill as a central data interception and processing facility for global signals intelligence, including phone calls, emails, and Internet traffic from UK citizens. The discussion then focuses on power usage, noting that Menwith Hill’s subterranean operations are referenced by former intelligence personnel as involving underground components and high electricity usage—“enough electricity to power an entire small city,” with 1.7-megawatt backups and 30 MVA capacity—implying the presence of old world technology beneath the ground beyond what is publicly acknowledged. The 37 radars consume power, but not to justify such consumption, leading to the claim that something powerful lies underground. Fort Meade, the NSA headquarters in Fort Meade, Maryland, is described as the United States’ primary agency within the Five Eyes, with the official mission to analyze foreign electronic communications, secure classified US government communications from cyber threats, cryptography and code breaking, provide intelligence to the military, identify terrorist networks, and share with allies. Yet the speaker questions why Fort Meade would require 60–70 MW of electricity, equating that to powering 50,000 homes, and notes public records showing a 100 MW-scale power demand for the site, suggesting underground or hidden infrastructure. Allegations include black rooms, high-security vaults inaccessible even to high clearance personnel, and the possibility of underground facilities. The discussion references a 2016 Baltimore Gas and Electric substation and transmission line built to serve Fort Meade, implying sustained or growing loads, and notes that in 2006 NSA operations maxed out the Baltimore area power grid—claims that fuel speculation of underground or old world technology beneath Fort Meade. The speaker ties these observations to a broader theory of old world technology found beneath sites like Pine Gap, Menwith Hill, and Fort Meade, potentially powering underground cities or facilities. Additional topics include a May 2025 assertion by a former assistant secretary of housing about a $21 trillion secret underground network, the RAND Corporation’s 1998–2015 references to underground and undersea facilities, and a suggestion that trillions in missing or unaudited funds may be connected to these hidden networks. The RAND reference is used to imply a broader, interconnected system, with the speaker signaling a plan to explore further, including references to 6,200-foot tunnels under Central California and a claim of a Japan tunnel documented in RAND materials but not maintained on mainstream maps. The overall synthesis points toward a belief in hidden underground infrastructures connected to the Five Eyes and global power networks, with a promise to continue exploring these connections in subsequent episodes.

First, a drilling rig is used to drill the well into the target formation typically around 10,000 feet deep. Then a 90 degree turn is made and another 10,000 feet is drilled laterally through the producing formation. After the well is drilled, the casing is run into the well and cement is pumped down behind it. This provides multiple barriers between the wellbore and the earth's formation so that there is no leaks or contaminations. Explosives are then run down in the horizontal section of the wellbore and used to perforate the oil producing zones. Chemicals, water, and sand are then pumped into the fissures to open them up so that oil and gas can flow through from the reservoir to the wellbore. Now this is where the concern around water contamination comes into play.